Laying concrete paving slabs. Paver slabs are quite simple to lay by oneself.
Paver slabs are easy to lay if you have the correct equipment and supplies. Your walkway will be a stunning sight for many years to come, so it will be worth the effort.
Laying concrete paving slabs. Redesigned pathways in the garden
There must be a walkway in the garden if you wish to walk there with dry feet. To achieve this, panels with a slightly rougher surface work best.
- See also: How to install paving slabs on gravel
- See also: The ideal substructure for paving slab installation
- Purchase large-format concrete slabs as well.
Popular aggregate concrete slabs with surface-mounted ornamental pebbles are not always as good as they appear. When wet, they turn slick very quickly. Furthermore, moss can quickly grow if you don’t properly sweep and clean.
Paver slab installation small work – small distances
You can also use transition stones and a little sand if you only want to construct a brief trail that won’t remain forever. It’s not necessary to position the stones precisely. Enough that they precisely match the length of your steps.
The individual steps, nevertheless, need to rest safely. To straighten out each stone, you pour sand underneath it with a shovel. You can make a useful tiny trail in the grass if you use particularly rough stones for this.
Laying concrete paving slabs. The drawbacks of having a path just beside the lawn
Later on, it will be a bit of a pain to mow around the stones. Here, you must use a string mower to trim the edges on your own.
Detailed guidelines for installing paving slabs
- Sand
- gravel
- control of weeds
- slabs of paving
- wheelbarrow
- shovel
- spade
- Hardware stores hire out tamper/vibrators.
- Rubber mallet
- Skin-strip
- Spirit degree
- crease-resistant tape
- Wooden hooks
- line
Laying concrete paving slabs 1. Organizing and purchasing
You only need to put forth the effort yourself. Nevertheless, because there are continual repairs to be made, the paving is done in waves. Planning carefully is also preferable when done independently.
This covers the path’s width as well as obtaining estimates for gravel, sand, and gravel. Together with the quantity of paving slabs, you need to precisely determine the appropriate amounts.
Recall that it is very inconvenient to run out of sand or gravel when working on the project on the weekend.
Laying concrete paving slabs 2. Delineation and marking
Now design the pavement where it should be according to the blueprint. Use wooden pegs in the corners to tap the ground and tie string between them to accomplish this.
Laying concrete paving slabs 4. Prepare the space by excavating the ground.
The future sidewalk’s foundation must be excavated to a minimum depth of 20 cm. A distance of up to 40 centimeters may be required, depending on the strength of the succeeding load. For instance, if an automobile is going to be used on the path occasionally.
Laying concrete paving slabs 5. Use a sparse covering of sand.
On a level surface, a coating of sand approximately half a centimeter thick is applied.
Laying concrete paving slabs 6. A layer of coarse-grained gravel for drainage and support
The sand layer is covered by a layer of gritty gravel. The dirt has never been somewhat compressed before. For this modification, a real vibrator is not necessary.
7. Press down on the pebbles
The coarse gravel is covered with fine grit. The slope needs to be maintained, so pay attention to it. It’s imperative to pack the gravel firmly. For this, a strong vibrator is perfect.
For tiny walkways, a tamper suffices as well. To create a perfectly level, smooth basis for the stones, the surface must be pulled and smoothed multiple times using a puller.
8. Present the fleece
Before installing the panels, you can, if needed, cover the gravel with a fleece of weeds. The entire surface shouldn’t be covered by this folding. The fleece should overlap by around 10 centimeters where you need to start.
9. Arrange the paver slabs.
It’s simple to lay out the panels once the ground is properly ready. But be sure to adhere precisely to the rows. Tap each panel from the previous row with a rubber mallet.
Laying concrete paving slabs. How to properly clean concrete paving slabs?
Right after the slabs are laid, they may turn out to be dirty with cement residues, which are usually abundant on the construction site. You can remove such cement using BETOFF-BIO liquid, which is plant-based and easily removes cement deposits. Another type of stain that may appear over time on concrete paving slabs is moss and oil stains. This type of dirt is best removed using BETOFF-B liquid. This is a specialist agent for cleaning concrete surfaces.
ADVICE & SECRETS
If at all feasible, design the pathway so that cutting the panels is not necessary. If so, you ought to buy plenty of safety shoes, leather gloves, and eyewear. Next, we use a flex to carefully cut.
