Cement curtain remover. Check out BETOFF brand cleaning products! Take down the cement curtain. A thick residue known as a cement curtain remains after tiles are placed and sealed using cement mortar. What’s left on the tiles is a very thin layer of mortar. Newly laid tiles can be ruined by cement curtains, which can be challenging to remove.
Cement curtain remover. Take down the cement curtain. Safety gear is required.
You must take the necessary safety measures before beginning to remove the cement curtain. Keep in mind that cement curtain removers are strong chemicals when applying them. As a result, we advise utilizing the following choices:
- safety glasses
- mask for the mouth and nose
- Work gloves
- spongy
- Cleaning brush (not required)
- Remover of cement curtains (BETOFF-BIO)
Take down the cement curtain. Selecting an appropriate cement curtain remover
Purchasing the appropriate product for the surface you are working on is crucial before you begin. Using the incorrect products can lead to irreversible damage to the floor, wall, and tools in addition to time wastage.
Cement curtain remover. Product Fit for Acidic Environments
- BETOFF-BIO Smooth ceramic tiles, concrete surfaces, and paving slabs in all varieties of natural stone.
- HG Limex coarsely tiled areas. Indeed.
- Marble floors made of Nibo limestone.
- Rolith RB1 intended to face brick. Burned bricks, sand, lime, manganese, clay, Westwalder, admixtures, and stones with engravings. Indeed.
Forever treat a limestone floor using an acidic substance! Acids have the potential to permanently harm floors. Never forget to test any liquid on an extra trial tile before using it!
Cement curtain remover. Take down the cement curtain.
There are various methods for taking down cement drapes. Not every grout and tile combination is the same, so not every approach is suitable for every surface. The cement curtain is typically harder to remove the longer it is on the tile. Thus, act quickly to avoid having the issue worsen!
Removal of cement curtain. Applying the cement remover BETOFF-BIO
First things first, be sure you have followed the right procedures for preparation. Generally speaking, cement curtain removers are strong caustic substances. Thus, gather all trash and keep kids away from them. BETOFF-BIO is the sole agent that isn’t caustic.
Dilution: You normally need to dilute the agent if the cement curtain is still fresh because, otherwise, it can erode the joints. The precise ratio varies based on the product, but you should always begin very slowly combining the two ingredients. It is always possible to add a little product to the combination if it does not work at first. Most of the time, you may use the pure agent to remove old cement curtains—just make sure to read the package.
Agent application: Use a sponge or cloth to apply BETOFF-BIO. It can also be poured onto the surface if needed.
Allow it to work: You can give BETOFF-BIO five to ten minutes, depending on how serious the issue is.
cleaning: A soft sponge is best to begin the actual cleaning process. If it doesn’t work, give a scrub brush a go. When strictly required, and ideally just on rough tiles, use an abrasive sponge. Scratches can occur on smooth tiles. With hard scrubbers working in small circular motions, the cement veil should soon come off.
Rinsing: Use warm water to rinse the product after you’re done. To ensure that the liquid and dirt have vanished, repeat this process twice. In the restroom, this is particularly crucial as otherwise, product residue may adhere to your feet.
Alternative techniques for eliminating cement curtain from tiles
Water: Scrub the grimy tiles with a towel and a pail of lukewarm water. Take care not to scrape off newly filled joints if there is fresh grout.
Muriatic acid: Excess cement can be removed with the aid of a diluted solution of muriatic acid. Muriatic acid can harm joints and even tiles, so proceed with caution.
Dry towels: Although it won’t be simple, using a dry towel or old newspapers to scrub assiduously can also be effective.
Use a window scraper as a last resort if all other methods have failed. Remove the dirt gradually so as not to cause any harm to the tiles.
How can you keep your tiles from developing a cement curtain?
You might need to cover your tiles before grouting to prevent stains. Cement can be used to stain tiles that require grouting with ease. Once the grout has been set, you will see a dull layer of cement on your tiles if your tiles become discolored with grout.
Clean the tile surfaces.
Wipe the tiles completely with a warm, damp sponge as soon as the grout has cured. Avoid over-scrubbing as this could unintentionally harm the grout. Do not begin washing the tiles too soon because of this.
Covering / Sealing
Another strategy to prevent grout that’s difficult to clean before grouting, the tiles should be carefully sealed with a cement curtain. Particularly glossy ceramic tiles have a lot of microscopic pores where cement might collect. Serious issues can be avoided by impregnating these tiles before grouting.
Apply liquid BETOFF-BIO.
Our ground-breaking BETOFF-BIO liquid acts quickly, safely, and effectively to remove cement curtains from tiles. Because it is plant-based, BETOFF-BIO doesn’t corrode, doesn’t smell when applied, and doesn’t suffocate. BETOFF-BIO is safe for use on a variety of fragile surfaces, including plastic, wood, glass, rubber, galvanized steel, and ceramics. Have faith in 2025’s inventiveness!
