A product for removing dried concrete

A product for removing dried concrete. As much as we like to use concrete, we don’t want our trucks, tools
and other equipment to get dirty with it. Unwanted concrete coating adds weight to the equipment, and
reduces the time of its usage. It makes it dirty and look unpleasant. So, find out about an innovative way
that allows you to remove dried concrete dirt.
Innovatech has developed a molecular cement solvent called Betoff and a second one called Betoff-Bio.
They are an alternative to acid for removing hardened concrete from tools, trucks and other equipment.
The company uses an active ingredient found in the syrup of one of the endemic plants. The product is not
hazardous to equipment and workers, it does not harm the paint and is biodegradable (Betoff-Bio). The
impact of endemic components on concrete has been known for many years. In some parts of the world
they are commonly used to delay mortar binding and other cement products.
In December1957 study confirmed that: “There are plants that affect both fresh and hardened concrete, a
dry ingredient has no effect on hardened concrete, and plant solutions can be very corrosive.” Now, a few
years later, an Innovatech’s creative and persistent chemist from Innovatech has turned this vulnerability
into an opportunity namely to remove safely the hardened concrete from various surfaces that they used
to be very difficult to clean.
Betoff fluids act by breaking the ionic bond to release cement from any surface they are attached to.
Basically, Betoff and Betoff-Bio fluids convert positive ions into integrative ions with hard matrix and
dissolve the cement, which can then be rinsed off.

A product for removing dried concrete
Concrete

A product for removing dried concrete. How Conlix-Bio acts?

Betoff-Bio is extremely easy to use. First, you saturate the dried concrete with it. After 15 minutes, the
liquid should be applied again on the same surface. The Concrete usually starts to soften within 20-30
minutes. After this time, the dissolved concrete should be rinsed with water. You can use repeated
applications to remove the thicker layers.

Concrete remover: the easy way to clean masonry tools

The use of a dissolving agent for concrete is one of the tactics that is used to remove old mortar on
masonry tools, equipment and vehicles. Its mild acid and foaming substance also remove unwanted
concrete deposits from glass, metal, most plastics, varnished and wooden surfaces.
Although preventing cement dirt from accumulating on the tiles during grouting is the guarantee for their
best protection, it is not always possible to do so.
A product for removing dried concrete. Why do we need a concrete solvent?
One purpose is to clean the remains of masonry work and another is to clean the tools used in masonry
work. Betoff-Bio concrete solvent deals with the latter. If you have a problem with very old concrete, e.g.
stuck on a concrete mixer, then you should use Betoff fluid. This fluid is the strongest fluid on the market!
Start by asking the main question.

What is your problem?

Is your home undergoing renovation work and your patio is covered in cement dirt? Do you see the
concrete on the tires of your wheelbarrow?
Has your father just tiled the bathroom, and are they now stained of hard cement mortar?
On the sides of the stucco wall, do you discover that the concrete has overflown its frames?
Has the cement mix been poured in some unwanted place? E.g. In the toilet?
Has concrete hardened on your window and window frame?
Has anyone inadvertently allowed tools soiled with concrete to remain exposed to the sun for extended
periods?
If any of the above questions apply to your situation, feel free to use one of our concrete removal and
cleaning fluids.

A product for removing dried concrete. Why is it worth using?
You have two options: throw away your dirty tools or clean and restore them to their original appearance.
You invest a lot in tools and equipment. Save money by taking care of your equipment. Clean tools in
order to work better!
Masonry instructor J. Kreh notes: “As soon as tools and equipment are no longer used, they should be
washed with water to remove all concrete. If the concrete has hardened, it is difficult to be removed and
can cause rust or damage metal parts.” In difficult cases, Conlix-Bio concrete solvent helps”.
removing dried concrete with Conlix bio
Conlix bio effective cleaner
A product for removing dried concrete. How it works?
After spraying the product on the dried concrete, the chemical components break down concrete and
mortar by loosening mainly the bonds that hardened them.
The agent should be left on the dirty surface for about 15-30 minutes. After this time, wipe or rinse off any
cement residue.
If the first application is not sufficient, repeat the process again, reapply the remedy, allow it to be
absorbed and wipe off any residue.
Discover the instruction for effective cleaning of paving stones from oil. A weekend spent with family,
friends and aromatic and tasty grilled dishes usually leave beautiful memories. Unfortunately, grilling in the
garden can also leave greasy stains of oil on the cobblestones. Greasy stains from grilled food or engine
oil look very unsightly on paving stones, and at the same time are extremely troublesome. Oil is heavier
than water, so removing grease stains is a very difficult task that requires some precautions.
The characteristic feature of oil stains is that they penetrate very quickly into a porous surface, and at the
same time increase their size very quickly. A few drops of engine oil on the driveway quickly increase their
size to the size of an A4 sheet. Oil stains should therefore, be removed as soon as possible to prevent
them from getting larger, because older grease stains are a huge challenge. Removing grease stains
quickly and effectively seems impossible, especially considering the high risk of discolouration of the
paving stones. Engine oil or grease stains after a successful grilling are inevitable, but it’s worth knowing
how to get rid of resistant and unsightly dirt. Conlix-Bio fluid is noteworthy, as it is fast, effective and very
safe. Conlix-Bio will not burn your skin and you will not choke during the application.
Cleaning the paving stones from oil. Remove grease stains—traditional methods
Engine oil stains and grease stains from grilled food can be easily removed with a pressure washer. This
method acts well for fresh dirt and only for impregnated paving stones. In other cases, oil stains should be
removed by using other means. For fresh grease stains, use a mild detergent, such as washing-up liquid.
It is enough to apply the detergent directly to the stain, clean the stain with a sponge, and then rinse
thoroughly with a strong stream of water. Removing grease stains with washing-up liquid and water will be
useful in the case of a quick reaction to the stain. The method will not be effective on older oil stains.
Is removing oil stains from paving stones with sand effective?
Another way to remove grease stains is to sprinkle them with sand and then wash the cleaned surface
with a stain remover. The sand should be left on the fresh stains as it absorbs the oil and prevents it from
penetrating the paving stones. That is why removing grease stains with sand is one of the most frequently
used methods. A gas burner can be used to treat older oil stains. Removing grease stains with a gas
burner, however, requires a lot of practice and precautions. Additionally, this method is quite risky and can
cause discolouration of the concrete. A fairly popular method is to remove grease stains with a brake
cleaner. The remover effectively removes oil stains, but it is a very time-consuming method and requires

the use of a large amount of preparation. Even a small oil stain requires almost the entire package of the
brake cleaner.

Cleaning the paving stones from oil.

Specialist measures for oil stains from engine oil and grilled food fat on concrete are among the most
difficult to remove. Greasy dirt spreads quickly and penetrates very deep into the surface of the paving
stones. Removing grease stains becomes quite a challenge, especially in the case of older dirt. Traditional
methods, such as a pressure washer, mild detergent, sand or a gas burner, do not always get the desired
effect. Many people use specialized agents to remove grease stains. Preparations for removing grease
stains from paving stones effectively remove resistant dirt, but they may affect negatively your health, the
environment and the treated surface which needs cleaning.

Is it worth the risk of using a fluid based on hydrochloric acid?

Most oil stain remedies on the market contain strong, caustic substances that are harmful to the
respiratory system and can discolour paving stones. The effectiveness of most agents is based on strong
chemical substances that are tough on grease stains. Specialized agents for removing grease stains on
cobblestones may irritate the respiratory system and have a negative impact on the environment.
Professional products for removing grease stains require great care when applying, because too much of
an oil stain remover can significantly increase unsightly stains and discolour the concrete surface. In
addition, hydrochloric acid, which is the main ingredient in most concrete cleaning fluids, is very
dangerous. The user can easily burn himself with it.

Leave a Reply

Your email address will not be published. Required fields are marked *